Even though burns are always a risk in a fire that started because of bad electrical safety in the home, suffocation is even more dangerous. Most people die in house fires because they breathe in smoke. For this reason, it is important to have professional electrical installation services in Santa Clara County to avoid such a situation. Electric shock is the other main electrical danger in the home. In this blog post, we will discuss some of the common ways to prevent electrical hazards so you can keep your family and property safe
Professional Electrical Installation Services in Santa Clara County to Avoid Electrical Hazards
There are several ways in which you can avoid common electrical hazards. But first of all, you should look for professional electrical installation services in Santa Clara County to hire professionals whenever there is electricity-related work. Professionals are experts, and they know how to take care of everything. They will also ensure proper installation so there will be no issue afterward. Here are some ways you can avoid electrical hazards at home.
Keeping Electrical Appliances Dry
When you mix electricity and water, you can die from electrocution. Keep water and moisture far away from appliances that use electricity.
If you drop an electrical appliance into the water while using it, turn off the power at your home’s electrical panel before you try to unplug or get it out. It’s also a good idea to have an appliance technician check the device after it’s dried to ensure it’s safe to use. If you need to work outside the house, you should never use power tools when wet.
Make Sure Your Electrical Outlets Are Safe
If you have young children at home, electrical safety outlet covers make your home safer. These things keep kids from sticking their fingers or small things like pins or paper clips into the outlets. This keeps them from getting an electric shock. Tamper-resistant outlets (TRR), now required by code, are a better solution. Moreover, check outlets for loose plugs that could start a fire or give you an electric shock, and don’t use too many adaptors and plugs in one outlet.
Never cut off a plug’s third prong to fit it into a socket with only two prongs. Change sockets with two prongs to sockets with three prongs.
Fitting the Right Bulbs in Light Fixtures and Lamps
Ensure you get the right wattage when buying light bulbs for your main lights or lamps. If you use a bulb with more wattage than the fixture or lamp can handle, the wiring could get too hot and start a fire. For example, a 100-watt bulb will draw more power through the wires than a 60-watt lamp can safely handle. Also, ensure bulbs fit well so they don’t get too hot.
Holding a plug firmly will help you pull it out of the wall. Pulling on the cord can damage it and make it more likely that there will be a short circuit, an electrical shock, or a fire.
Safeguard Against Electrical Surges
Look for professional electrical installation services in Santa Clara County to hire experts to help you prevent common electrical hazards. If you turn off things like TVs and computers when you’re not using them, they won’t overheat or get damaged by a power surge that could start a fire or damage the electronics. When equipment is turned on, you might want to use a surge protector. This is especially important if you live in an area where the power supply is unstable.
Be Careful with Electrical Cords
It can be dangerous to have electric cords that:
- Run under carpets or rugs.
- Cross the furniture.
- are in places with a lot of people.
Check your electrical cords every so often to ensure they aren’t frayed or broken in any other way. Extension cords should only be used for short-term solutions. Also, throw out any cords or plugs that are frayed or worn. Make sure you don’t pull power cords out of the wall. Don’t pull the cord, but the plug.
Don’t Ignore Persistent Circuit Breaker Trips
When a short circuit or overload happens, the circuit breaker trips. If this keeps happening, it’s clear that something is wrong, which could become a big safety problem. Some reasons why a circuit breaker keeps tripping are:
- A broken device.
- Wires that are old or broken.
- The circuit breakers themselves were wearing out.
Leaving Electrical Repairs to the Experts
Trying to save a few dollars by doing your electrical work is a sure way to get into trouble. Moreover, trying to fix or rewire your electrics is a very bad idea because you could get shocked.
After a do-it-yourself electrical job, there can also be a hidden danger: problems in the wiring system that could start a fire at any time. Also, fixing or upgrading a broken appliance by yourself is dangerous.
Get a Professional Electrical Safety Inspection
If you think there might be a problem with your home’s wiring system, you need professional electrical installation services in Santa Clara County for an electrical safety inspection. It is also important for risk assessment for your peace of mind, your family’s safety, and the safety of your property. Also, if your home has aluminum wiring, you should have an electrical safety check at least once every five years. If you are looking for experienced and certified professionals, you can contact Rashid Kaddoura Electrical Heating and Air conditioning LLC. Our experts will ensure proper installations and prevent your property from any electrical hazards.
Read more recommended articles here.